Europe's leading producer of Pillars and Spacers

Nylon Pillars FAQ


Can I specify the length of a pillar?

Yes. With Round and Hexagonal Pillars although minimum body sizes are determined by the size of thread, any lengths may be specified above that minimum.

Back to top


Can I specify a smaller thread size?

You can with round pillars. For example you may wish to specify an M3 thread within a body diameter of 12.7 instead of the standard M6.

Back to top


I notice that G&B suggest minimum body lengths. Can these be reduced if smaller thread sizes are required?

Yes, again with round nylon pillars. For example if you require a body dia. of 12.7 With M3 threads the mimimum body length would be 10mm. (An M4 would be 12.7mm etc.)

Back to top


Can I specify different thread sizes at each end?

This can be done with round nylon pillars. First determine the body size required for the larger thread and any smaller thread can be accommodated at the other end.

Back to top


Can I specify the length of the male/female threads?

Yes. With round and hexagonal pillars standard thread length/depths apply to stock sizes as detailed. But should you require longer/shorter male or deeper female sizes these can be accommodated.

Back to top


Are nylon pillars shock resistant?

Yes all round, hexagonal and micro pillars are shock resistant. Please see our section on shock resistance.

Back to top


Do nylon pillars provide insulation?

Yes all round, hexagonal and micro pillars provide insulation. Please see our section on insulation.

Back to top


Am I restricted to buying in 100's?

No. All nylon pillars are sold in moq's of 100, however you may order any quantity above this moq.

Back to top


What type of material is the nylon?

Round and hexagonal are manufactured in Nylon 66. Micro pillars are manufactured in Nylon 6.

Back to top


Can I specify different materials?

Yes. For example we are often requested for round pillars to be manufactured in ptfe.

Back to top


What is the operating temperature of Nylon 66 and Nylon 6?

-30°c to +85°c

Back to top


What about special features such as screwdriver slots?

G&B are manufacturers and so screwdriver slots, cross holes etc. and plated inserts can be supplied upon request.

Back to top


Can the nylon body be supplied in different colours?

Yes. Alternative colours are available upon request.

Back to top